shrinkages
英
美
(shrinkage 的复数) n. 收缩, 收缩量, 减低
[化] 起皱; 收缩; 收缩量
shrinkage的复数
双语例句
- Compared with the other shrinkages of hydraulic mass concrete, temperature shrinkage is the most prominent.
在水工大体积混凝土中，温度收缩是其主要的收缩。 - Influence of Ram Extrusion of PTFE Product Properties and Shrinkages
聚四氯乙烯柱塞挤出工艺对制品性能及收缩率的影响 - The shrinkages of green bodies in X, Y, Z directions were measured. The results show that under the same pressure, there is no difference of shrinkage in X and Y directions, and does not change with the height.
结果表明，同一压力下，坯体X向和Y向收缩率一致，并且不同高度处的X、Y向收缩率无明显差异。 - Abstract: introduced is the experience in replacing atmosperic riser with thermal-isolation riser and improving pouring system to eliminate shrinkages.
文摘：介绍了用保温冒口代替大气压力冒口，改进浇注系统解决铸件缩孔问题的经验。 - Proceeded research to the workability, mechanical property and frost resistance of concrete using the method of orthogonal test, furthermore, carried on experiment for permeability resistance 、 wear-resisting property and drying shrinkages between fly ash concrete and only mixing admixtures concrete.
采用正交试验的方法对混凝土和易性、力学性能、抗冻性进行研究，并开展粉煤灰混凝土与只掺减水剂混凝土的抗渗性能、干缩性能、耐磨性能试验。 - Testing method for drying and firing shrinkages of ceramic whiteware clays
陶瓷用粘土干燥收缩率和烧成收缩率测定方法 - During the solidification of ductile iron, the volume change can be separated into several stages: after molten iron poured, shrinkages occur along with the temperature descent;
球墨铸铁凝固过程中的体积变化可以分成如下几个阶段：浇注后，铁水随温度的下降，发生液态收缩； - In physical and mechanical indexes, the basic density, air-dried density, compression strength parallel to grain, MOR, MOE and toughness of mature wood are higher than that of juvenile wood. The shrinkages of juvenile wood are higher than that of mature wood.
在物理力学性质指标中成熟材的基本密度、气干密度、顺纹抗压强度、抗弯强度、抗弯弹性模量及冲击韧性高于幼龄材；而幼龄材全缩率高于成熟材。 - Variation in Densities and Shrinkages of Chinese Fir Wood From Plantation
杉木人工林木材密度及干缩性变异规律 - When the magnesium alloys are welded by TIG or MIG, the metal in the seam will be oxidized acutely. Some defects such as cracks, voids and shrinkages appear.
当镁合金采用钨极氩弧焊、熔化极气体保护焊等焊接方法时，焊缝金属会剧烈氧化，产生气孔、裂纹等缺陷。