perpendicularly

英

美

网络  垂直度; 垂直地; 直立地; 垂直

BNC.49100 / COCA.37091

英英释义

adv

• in a perpendicular manner
  1. this red line runs perpendicularly to the green line
• straight up or down without a break
  Synonym:sheer

双语例句

• The perpendicularly rotating siamesed wind wheel has the advantages of simple production and processing, easy installation, high intensity and low cost.
  本实用新型生产加工简单、容易安装、强度高成本低。
• Fray's forehead was wrinkled both perpendicularly and crosswise.
  弗雷的前额上纹路纵横。
• The reflectivity-temperature curve of the probe surface to 6328 A laser, and the temperature traverse curve of the staff installed perpendicularly on a high temperature wall-plate are given.
  并且通过实验，给出了探头表面对6328A橙红激光的反射率随温度变化的曲线，以及高温壁板上垂直装置的杆件上的温度分布曲线。
• The results demonstrate that the critical pressure difference of bubble traversing through joint of constricted capillary tubes perpendicularly decreases with the increase of bubble length or the radius of capillary tube, and is also affected by the variety of liquid obviously.
  研究结果表明，气泡垂直穿出变截面毛细通道所需要的临界压力差，随气泡长度和毛细管半径的增大而减小，液体种类对其也有明显影响，实验结果与理论计算值基本吻合。
• Based on analytic method and set operation method, the geometric characteristics of the intersection and union of two or three cylinders with their axes intersecting perpendicularly were studied.
  采用解析方法和集合运算方法，首先对柱柱正交中的交集体和并集体的几何特性进行了研究，推导出了它们的表面积和体积的解析表达式。
• Based on the optimal control theory, the paper deduced an optimal and perpendicular impact guidance law for intercepting a maneuvering target perpendicularly.
  该文基于最优控制理论，在性能指标为控制能量最小的前提下，对垂直拦截机动目标的导引律进行了推导，得出无级变速鱼雷在垂直命中条件下攻击机动目标的导引律。
• We tested the sound pressure level before and after the sound ( 1 400Hz~ 3 200Hz) passed through the steel array structure perpendicularly.
  对1400Hz-3200Hz的声波垂直通过管阵列结构模型前后的声压级（SPL）进行了实验测试，发现了多处频段声压的加强与减弱区。
• Analytical Model on Non-circular Penetrator Impacting Semi-infinite Target Perpendicularly
  异型侵彻体垂直侵彻半无限靶板的分析模型
• Using the slider to drive a metal bar to cut perpendicularly the uniform magnetic field in the center of a Helmholtz coil, induction electromotive force could be produced.
  利用滑块带动金属杆切割亥姆霍兹线圈中心区域匀强磁场的磁感应线，可以产生感应电动势。
• A bolt hole is formed in the shaft body in such a manner as to substantially perpendicularly intersect the axis of the shaft body.
  螺栓孔以与所述轴体的轴线基本上垂直相交的方式形成在所述轴体中。