deflections

英 [dɪˈflɛkʃənz]

美

n.  (尤指击中某物后)突然转向，偏斜，偏离
deflection的复数

柯林斯词典

• N-VAR 偏斜;偏转
  Thedeflectionof something means making it change direction.
  1. ...the deflection of light as it passes through the slits in the grating.
     光线通过光栅狭缝时的偏转
• (体育运动中球击中某物后的)转向，变向
  In sport, thedeflectionof a ball, kick, or shot is when the ball hits an object and then travels in a different direction.

双语例句

• In geometric nonlinearity, the effects of instability produced by axial forces, the bowing of the deformed members, and finite deflections have all been included.
  在几何非线性的影响下，所产生不稳定的轴向力、弯曲变形产生的弯矩，以及有限制的偏移量均包括在内。
• So the deflections of concrete beams prestressed with bonded FRP tendons are expected to be larger than those of the steel bars cases.
  国内外已有试验研究表明，有粘结预应力FRP筋混凝土梁的破坏模式包括界限破坏、受压破坏与受拉破坏三种。
• The major application of these data is to define the control deflections required to stabilize the vehicle.
  这些数据的主要应用是确定稳定飞行器所需要的控制偏角。
• Experimental results indicate that the cracks weaken the strength of slabs, lower their stiffness, and induce the deflections of slabs beyond limit.
  试验结果表明，支座边的裂缝严重削弱了板的承载力，降低了楼板的刚度，导致楼板的挠度过大。
• Where required, to examine deflections, stiffness requirements, and any special material and design provisions to obviate brittle fracture under adverse conditions.
  必要时验算挠度、刚度要求、以及任一特殊材料和设计规定，以预防不利条件下的脆断。
• When aerodynamic solution and structural deflections are both converged, the aerodynamic characteristic of the elastic wing is obtained.
  将非线性气动力与结构线化机翼弹性变形耦合迭代求解。
• Equations are established based on the principle of deflections consistency.
  根据板簧变形协调原理，导出相应的方程。
• But, more significantly, the overturning moment and the shear deflections produced by lateral forces are much larger and must be carefully provided for.
  更重要的是侧向里所产生的倾覆力矩和剪力变形要大的多，必要谨慎设计来保证。
• An increase in resistance to roll deflections may be gained by splitting the single strut into a fork at the top.
  采用上部分呈叉状的单支杆可以增强抗滚转变形性能。
• The associated permitted deflections shall be included in the contract documents.
  相关许可挠度应当包含在合同文件中。